Würzburger Str 13, 63811 Stockstadt +49 (0)6151 5990-291 support@example.com

Select your language

Slitter

We have built slitter for a wide variety of materials, such as paper, cardboard, plastic film of all kinds, insulating and sealing material, bonded leather, thin sheet metal, highly elastic insulating materials or pressure-sensitive foils with supporting carrier paper as well as rubber and floor coverings.

Here are some reference objects:

  • Slitter with tangential cut
    laengsschneider-tangentialschnittThis slitter constellation ensures an edge-friendly cutting process decreasing material stress and is suited for a wide variety of materials (e.g. paper, plastic film, textiles, etc.). Equipped with a pneumatically expanding knife shaft for the bottom knifes and pneumatic top knife holder the slitting positions can be changed quick and easy.

    Material:                        paper, cardboard, plastic films, textile
    Working width:                                                      1.850 mm

  • Slitter for weighted film
    With the "crush cut" method (crush cut knife on hardend surface) a wide variety of materials (e.g. weighted film, max. 6 mm thickness) can be cut easily.

    Technical data of the machine displayed

    Working width: 500 bis 2.000 mm

    Slitter (crush cutt) for weighted film
    Slitter (crush cutt) for weighted film
    Slitter (crush cutt) for weighted film
    Slitter (crush cutt) for weighted film
  • Rotary shear (slitter)
    The rotary shear is used to slitt thick material webs (e.g. cardboard, leather, rubber, sponge cloth, etc.). The solid construction absorbs high forces that may occur during slitting. The double-split rotary knives allow a knife change without removing the knife shafts.

    Technical data of the machine displayed:

    Working width: 1.500 mm

    Rotary shear
    Rotary shear
    Rotary shear
    Rotary shear
    Slitter with rotary knifes
    Slitter with rotary knifes
    Rotary shear
    Rotary shear
    Rotary shear
    Rotary shear



     

  • Slitter system type LSA 4/25/1600

    laengsschneidsystem lsaThe rotary shear knifes slitt thin aluminum foil with minimal burr.

    Working width: 40 bis 1.600 mm
    Web thickness:      0,1 - 0,5 mm

  • Trimming as exchangeable device
    The trimming device is equipped with 2 saw units and is used to trim a stiff material web (e.g. laminate or chipboard, etc.). Depending on the material, this unit can be exchanged for a cassette with a different cutting system (e.g. with circular knives).

    Technical data of the machine displayed

    Working width: 500 - 1.450 mm
    Web thickness: 2 mm

    Trimming device
    Trimming device

Blue
Green
Orange
Red